Multiplex Technology 4CH Instrukcja Użytkownika Strona 1

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Cyfrowe rejestratory wideo (DVR) Multiplex Technology 4CH. Multiplex Technology 4CH User manual [en] Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj

Podsumowanie treści

Strona 1 - 4CH H.264 Multiplex DVR

User Manual4CH H.264 Multiplex DVR

Strona 2 - WARNING

6 2.4 PTZ Mode PTZ – Remote Controller Control / SLOW Move PTZ up. / Move PTZ down. / Move PTZ to the left. / Move PT

Strona 3

7 Same as [PIP]. Set current PTZ location as the starting point of the line-scan. Same as [FREEZE]. Activate line-scan. Same as [

Strona 4 - TABLE OF CONTENTS

8 Chapter 3 INSTALLATION 3.1 System Configuration

Strona 5 - Chapter 1 FEATURES

9 3.2 Hard Disk Installation Step 1: Remove the 3 screws from DVR as cycled below (PIC 1). (PIC 1) Step 2: Remove the front cover from DVR

Strona 6 - 2.1 Quick Setup

10Step 3: Place the HDD on the HDD plate and connect the power and the SATA cables (PIC 3). (PIC 3)

Strona 7 - GUI Hints and Tips

11 Chapter 4 BASIC OPERATION and MENU SETUP 4.1 Main Menu Setup To enter the main menu and setup the DVR, please

Strona 8

12 Main Menu – Remote Control ler and Front Pannel Control (Click MENU button to enter Quick Setup Menu ) Switch to different options under one

Strona 9 - 2.3 Playback Mode

13Item Description HDD FULL Select STOP to stop recording or OVERWRITE to reuse the HDD when HDD is full. [Stop]:Stop Recording [Overwrite]:Start t

Strona 10 - 2.4 PTZ Mode

144.3 Event Setup Item Description Motion Setup Enter to set up motion detection Sensor Setup Enter to set up sensor detection 4.3.1 Motion

Strona 11

15Item Description Alarm Duration(Seconds) Alarm duration time (1~60 seconds). Motion Popup Check the box to Enable/ Disable popup screen function

Strona 12 - Chapter 3 INSTALLATION

I This symbol is intended to alert the user to the presence of unprotected “Dangerous voltage" within the product's enclosure th

Strona 13 - 3.2 Hard Disk Installation

164.3.2 Sensor Setup Item Description Alarm Duration(Seconds) Alarm duration time (1~60 seconds). Sensor Popup Check the box to Enable/Disable

Strona 14

174.4 Schedule Setup Apart from manual recording, you can also setup the recording time by weeks and schedule recordings include: nor

Strona 15 - 4.1 Main Menu Setup

18Item Description Enable Schedule Record Enables schedule recording according to the time schedule (shown below). Enable Schedule Motion Det

Strona 16 - 4.2 Record Setup

19Item Description Mask Check the box to Enable/ Disable mask function for LIVE mode Sharpness Drag the white bar or press ◀ ▶ to adjust Sharpness

Strona 17

204.6.1 Permission Setup The Account Setup is set to provide individual user (maximum of 4 users) role-based permissions, including access to S

Strona 18 - 4.3 Event Setup

21Item Description Connect type Setup mode for network connection: ADSL、、、、DHCP、LAN. HTTP Setup Enter to set up HTTP for remote access into DVR.

Strona 19

224.7.1.2 LAN Select LAN for network connection, the following information is required. Item Description IP Address Enter IP address provided by

Strona 20

234.7.1.3 ADSL Select ADSL for network connection, the following information is required. Item Description User Name Enter user name pro

Strona 21 - 4.4 Schedule Setup

244.7.2 HTTP Setup Item Description Enable HTTP Server Check to enable HTTP server. Users can remotely access into the DVR over the network if th

Strona 22 - 4.5 Camera Setup

254.7.3 DDNS Setup Item Description Enable DDNS Check/ Uncheck to Enable/ Disable DDNS function. DDNS Server Select the DDNS Server wanted. Hos

Strona 23 - 4.6 Account Setup

II All the safety and operating instructions must be read before the unit is operated. • Make sure to switch the power off before you install th

Strona 24 - 4.7 Network Setup

26 E-mail can be used as a form of notification when an event occurs (VLOSS, MOTION, and SENSOR). Item Description Enable E-mail Notification Check

Strona 25

274.8 PTZ & RS-485 Setup The DVR allows users to control PTZ functions of your camera. To enable PTZ function, the 485 cable should be connec

Strona 26

284.9 System Setup Item Description DVR Name The name of DVR will be shown when users login from remote access. DVR Location The location of DVR

Strona 27 - Password

294.9.1 Display Setup Item Description Auto-Seq Interval ( Seconds) Click or press ◀ ▶ to set up duration time in seconds for the i

Strona 28

304.9.2 Date/ Time Setup Item Description Hour Format 12HOURS/ 24HOURS Date Format MM-DD-YY/DD-MM-YY/YY-MM-DD Date/Time Position Choose the posit

Strona 29

314.9.2.2 Time Zone Setup In time zone setup, users can change the time zone and activate Daylight Saving Time function according to your DVR loca

Strona 30 - Item Description

32 Item Description Automatic Synchronization Check to enable DVR automatic synchronization function. Select this option to enable th

Strona 31 - 4.8 PTZ & RS-485 Setup

33Item Description Mouse Speed Adjust the mouse moving speed Buzzer & Relay Setup Key Tone Enable/ Disable keystrokes. ALARM BUZZER Enable/ D

Strona 32 - 4.9 System Setup

344.10 Utility Setup Item Description HDD Initialization Select to enter hard disk initialization menu. Please stop recording before ent

Strona 33 - 4.9.1 Display Setup

354.11 Diagnostic Item Description Version The current firmware version of DVR IP Address The connected IP address of DVR. If disco

Strona 34

III TABLE OF CONTENTS Chapter 1 FEATURES ...

Strona 35 - Daylight Saving Time

36Chapter 5 SEARCH & BACKUP 5.1 Search Setup Item Description Event Search Press to enter event search menu. Time Search Press to enter ti

Strona 36

37The DVR automatically records events with type, time and channel information included. If there is recording data for an event, a yellow signal

Strona 37

38The amount of events can be numerous. Therefore, you can facilitate event sorting by setting up “criteria”. Setup “start time” and “end time” for

Strona 38 - 4.10 Utility Setup

39Click “date” to display recording time of that specific date with time bar. You can change time (hour/ minute/ second) or click on a

Strona 39 - 4.11 Diagnostic

40Chapter 6 SPECIFICATION I/O Video System NTSC / PAL switch Video Input 4CH BNC Video Input Level 1.0 Vp-p Composite, 75 Ohm Balanced Video Outp

Strona 40 - 5.1 Search Setup

41Post-Alarm Recording 1-60 sec Motion Detection 22X18 (sensitivity 0~10) PLAYBACK Search Mode Time, Event Playback Speed fast forward/backward 2X/4

Strona 41

42Chapter 7 NETWORK SURVEILLANCE 7.1 Remote Connection Step 1:Enter the IP address of the DVR in the IE browser. Provides two different ways of D

Strona 42

43Step 3: You’ve logged into the DVR Internet Explorer Software Application

Strona 43 - 5.2 Backup Setup

1 Chapter 1 FEATURES  Two USB ports (for mouse usage and backup).  Dual streaming enhances the speed of network transmission  Built-in VGA out

Strona 44 - Chapter 6 SPECIFICATION

2 Chapter 2 MAIN MENU OPERATION 2.1 Quick Setup Graphic Icons Resting the cursor on this icon will bring up the four (Main Menu/ Search/ Backup/ PT

Strona 45

3 GUI Hints and Tips Recording is on Number represents the current selected LIVE audio channel Live Audio is off Motion detected on

Strona 46 - 7.1 Remote Connection

4 2.2 Network Remote Instructions Same user and DVR-site interface, the only difference is network toolbar which is situated on the lowe

Strona 47 - Software Application

5 2.3 Playback Mode Playback – Quick Function Icon Press「 / 」button to Fast Rewind Speed : 2x, 4x, 8x, 16x, 32x, 64x Press「 /

Komentarze do niniejszej Instrukcji

Brak uwag